How to install a solar panel mount

How to install a solar panel mount

Is the current bill too high for you to pay? Are you thinking of discounting by using a source of electricity from renewable sources?

There are ma ny renewable sources around us, f or example, solar ENERG y, w energy ind, h dihydro energy, tidal energy, geothermal energy, biomass energy, etc. However, not all of them are suitable for home use.

Solar Panel is the most convenient source of green and self-reliant energy for ho m use e. So today our topic is mounting the solar panel. And we will learn how to install a solar panel in your sweet home.

A complete solar panel mounting guide

The solar panel allows us to create energy from sunlight as the leaves do. You can install a solar panel on the roof or floor to reduce utility bills. Let me see how it can be installed at home.

We will discuss the process in three parts.

Solar panel preparation

You can buy photovoltaic cells and make a solar panel on your own. Othe r wise, you can buy a Ready made photo volcanic mode, b ut - it could cost more. Now we will find out the process of manufacturing photovoltaic modules from photovoltaic cells.

Buy cells:

First, you need to buy the cells. You can buy them online or from local hardware retailers. e Bay is one of the most popular websites for selling solar cells. Polycrystalline cells are the best cost option for efficiency. The USA, China and Japan are famous for making cells.

Before buying cells, decide how many cells you need to cover the desired area. Buy a few extra cells, because these cells are very fragile. It generally costs $ 1.30 per watt for a cell.

Clean the wax:

The manufacturer can ship the cells you ordered in wax. In this case, you need to remove the wax from the cells. Use warm water, but not boiled.

Preparation of the reserve commission:

To make the support plate, you need a plate of non-conductive material. C Material A n either wood, plastic or glass, etc. We prefer wood the most either because you can drill it quickly. Now determine the dimensions of the second shape of the panel. Hold me in addition to any end of the plate.

Fix The Tabbing:

You will find three spots behind the cell. Glue the spinning thread along the width through the three points. The points must be dislocated before gluing them to protect it from oxidation. Keep an extra 2 inches on both ends.

Attach the cell to the board:

Put some glue on the back of the cell. Now press it lightly on the support plate. Glue all the cells one after the other in this way. Try creating more columns and fewer rows.

Wiring Photovoltaic Module:

Now connect one end of the wire of one cell to another making a serial network. Use the bus cable system for each end row. Now connect the end of one row with the beginning of another row.

Covers cells:

Now put bars at each age of the backup plate. Use the screw and the joint with the bottom to fix the respective bars. Then place a plate or a Plexiglas plastic plate on the bar. So the solar panel will be protected from water and fallen things. Do not use glasses in this case b ecause y can be easily broken.

Your solar panel is ready to install.

Connect the solar panel

Now you need to connect the whole system. Let's do this.

Use the diode:

Connect the diode to one of the wires coming out of the board. And the other side of the battery depending on the direction. The wir ing of the module connected to the diode is the negative wire. The diode is used to stop the reverse flow of direct current with the module not charging.

Positive side:

Now connect the other wire coming out of the mode with the positive side of the battery.

Connect the controller:

You need to connect the module heads and the battery to the charge controller. It will help you keep an eye on the whole system. Make sure you place the wires in the right place.

Connect electronics:

Now connect the electronics to the battery. Once the battery is charged, you can use it to light, fans and more.

Battery maintenance:

It may be necessary to add distilled water from time to time to maintain the acid concentration in the battery.

Place the solar panel

Now you need to put the photovoltaic module in the right place at right angles. There are several ways to angle the board.

  1. Put your r module on a basket. So you can change the angle and its place whenever you want. You can keep it safe in the house when it is raining or floating outside.
  2. Lay them on the roof. First, attach L f eet to the ceiling. Then attach the rails to the f eet with nuts. Connect the rails using rail spices. Then attach the photovoltaic module to the rails using a clip. This way, you will be able to use mini photovoltaic panels. But, you have to keep in mind that it is a permanent installation. So before installing it on the roof, be sure that where the sunlight falls the most. S A solar panel can withstand the sun for the longest time.
  3. Or you can put panels on a satellite stand. So you may also be able to program it to move with the sun.

The benefits of the solar panel

The solar panel is advantageous in many ways. Some of these are listed below:

Renewable energy source:

The solar panel is a set of photovoltaic cells. These photovoltaic cells generate direct current from sunlight. It is a renewable and green energy source.

Minimum maintenance:

The solar panel is very useful. Install it and then forget about it. But it will continue to supply electricity to your home. The only thing you will need to do after installation is a little maintenance.

Check the battery water level from time to time. And you should replace the solar panels twice a year depending on the direction the sun rises.

Do not take up space:

And most importantly, it will not take up any space. You can set them on the roof.


Solar panels are very useful in places where power lines have not yet reached.

Secondary source:

Solar energy can be the alternative source of conventional power lines in areas where the load frequently flows.

Bottom line

You have completed the installation of the solar panel. By using solar panels, you can help the world clean. Use less electricity and try to use renewable sources.

Leave a comment